How Do I Program A Samsung Bn59 00687a Remote Easily

Need to set up your Samsung BN59-00687A remote? This guide walks you through every method to program a Samsung BN59-00687A remote with ease. You will learn the auto search method, manual code entry, and smart hub setup with simple step-by-step instructions.

So you just got a new Samsung BN59-00687A remote and you want to get it working. Maybe you bought a new Samsung Smart TV or swapped out an old remote. Either way, you are in the right place. Programming a Samsung BN59-00687A remote is simpler than most people think. You do not need to be a tech expert. In this guide, we will walk you through every method step by step. By the end, your remote will be fully set up and ready to go.

The Samsung BN59-00687A remote is a powerful device. It works with Samsung Smart TVs and many other devices too. Whether you want to control your TV, soundbar, or streaming box, this remote has you covered. But first, you need to program it correctly. Let us dive in and make that happen.

Key Takeaways

• Three easy methods: You can program a Samsung BN59-00687A remote using auto search, manual codes, or the Samsung Smart Hub.
• No special tools needed: All you need is your TV, remote, and a few minutes of your time.
• Universal remote codes work: You can use a code list to pair the Samsung BN59-00687A remote with many devices.
• Troubleshooting is simple: Most issues fix with a reset or battery change.
• Voice remote support: The BN59-00687A remote works with Samsung Smart TV features like voice control.
• HDMI-CEC simplifies things: This feature lets your remote control multiple devices through one connection.

What Is the Samsung BN59-00687A Remote?

The Samsung BN59-00687A remote is a premium remote control made by Samsung. It is part of the Samsung BN59 series. This remote uses Bluetooth and infrared signals to connect to your TV. That means you do not always need a direct line of sight. You can point it anywhere near your TV and it will work.

Here are some key features of this remote:

• Voice control: You can use the microphone button to search with your voice.
• Smart Hub access: One button takes you straight to the Smart Hub.
• Backlit buttons: The buttons light up in the dark.
• Ergonomic design: It fits comfortably in your hand.
• Multi-device support: It can control TVs, soundbars, and Blu-ray players.

Understanding what your remote can do helps you get the most out of it. Once you program a Samsung BN59-00687A remote correctly, you will unlock all of these features.

Why Remote Setup Matters

Setting up your Samsung BN59-00687A remote the right way ensures smooth performance. A poorly programmed remote can cause lag, unresponsive buttons, or missing functions. Taking a few extra minutes to set it up properly saves you frustration later. Think of it as the foundation of your whole TV watching experience.

Before You Start Programming

Before you begin to program a Samsung BN59-00687A remote, there are a few things you should do first. Preparation makes the whole process faster and smoother.

Check Your TV Model

Not all Samsung TVs use the same setup. Make sure you know your TV model number. You can find this on the back of your TV or in the settings menu. Go to Settings, then Support, then About This TV. Write down the model number. This helps if you need to look up specific universal remote codes later.

Gather Your Equipment

You will need the following items before you start:

• Your Samsung BN59-00687A remote
• Two AAA batteries (included in the box)
• Your Samsung TV
• Your TV remote (the original one, if you still have it)
• A stable internet connection (for Smart Hub setup)

Insert the Batteries Correctly

This sounds simple, but it is a step many people skip. Open the battery compartment on the back of the remote. Place the batteries in the correct orientation. The plus and minus signs must match the markings inside. A weak battery can cause programming failures. Use fresh batteries for the best results.

Turn On Your TV

Make sure your Samsung TV is powered on. Set it to the correct TV input source. The home screen should be visible. This confirms that your TV is ready to receive signals from the new remote.

Method 1: Auto Search Programming

The auto search method is the easiest way to program a Samsung BN59-00687A remote. The remote automatically scans through all available codes until it finds the right one. This works great if you do not know your TV code.

Step-by-Step Auto Search Guide

Follow these steps carefully:

1. Point the Samsung BN59-00687A remote at your TV.
2. Press and hold the Setup button on the remote.
3. The LED light at the top of the remote will turn red.
4. Type 0101 on the remote keypad.
5. The LED will turn off. This means the remote is ready.
6. Press the Power button. The remote will start scanning.
7. Wait while the TV turns off. This means it found a working code.
8. Press the Setup button again to save the code.

That is it! Your Samsung BN59-00687A remote is now programmed. Test all the buttons to make sure everything works. Try the volume, mute, and channel buttons.

When Auto Search Does Not Work

Sometimes the auto search method does not find the right code. This can happen if your TV model is not in the remote’s database. Do not worry. Move on to Method 2, which gives you more control.

Method 2: Manual Code Entry

The manual code entry method lets you type in a specific code. This is the most precise way to program a Samsung BN59-00687A remote. You will need a code list to do this.

Finding the Right Code

You can find universal remote codes in several places:

• The user manual that came with your remote
• The Samsung website support page
• Third-party code list websites
• The back of the remote packaging

Look up the code for your specific TV brand and model. Write it down before you start. Having the code ready saves you time and frustration.

Step-by-Step Manual Entry Guide

Once you have your code, follow these steps:

1. Turn on your Samsung TV.
2. Point the Samsung BN59-00687A remote at the TV.
3. Press and hold the Setup button until the LED turns red.
4. Type in the code you found. Use the number pad.
5. The LED will turn off if the code is valid.
6. Press the Power button to test.
7. If the TV turns off, the code is correct.
8. Press Setup again to lock in the code.

If the TV does not turn off, try a different code from the list. Some brands have multiple codes. Work through them one by one until you find the right one.

Popular Samsung Remote Codes

Here are some common codes that work with many Samsung TVs:

• 0101
• 0010
• 1001
• 0060
• 0180

These codes cover a wide range of Samsung models. But always double-check with the official code list for your specific TV.

Method 3: Using the Samsung Smart Hub

The Samsung Smart Hub offers another way to connect your remote. This method works best if your TV is already connected to the internet. It uses the TV’s built-in settings to pair the remote automatically.

How Smart Hub Pairing Works

The Smart Hub method uses HDMI-CEC and Bluetooth to connect your remote. This is a wireless pairing process. You do not need to enter any codes. The TV and remote communicate directly.

Step-by-Step Smart Hub Setup

Follow these steps to pair your remote through the Smart Hub:

1. Press the Home button on the Samsung BN59-00687A remote.
2. Go to Settings in the Smart Hub menu.
3. Select General.
4. Choose External Device Manager.
5. Click on Device Connection Manager.
6. Select the device you want to pair.
7. Follow the on-screen instructions to complete the pairing.

Once paired, your remote will control your TV and any connected devices. This includes soundbars, Blu-ray players, and even streaming sticks.

Benefits of Smart Hub Pairing

This method has several advantages:

• No code searching needed: The TV handles everything automatically.
• Faster setup: Takes less than two minutes.
• Better device control: You can manage multiple devices from one remote.
• Automatic updates: The remote firmware stays current through the Smart Hub.

Comparison of Programming Methods

Not sure which method to use? Here is a quick comparison of the three methods for programming a Samsung BN59-00687A remote:

Method	Difficulty	Time Required	Best For
Auto Search	Easy	2-3 minutes	Quick setup without codes
Manual Code Entry	Medium	5-10 minutes	Precise control with known codes
Smart Hub Pairing	Easy	1-2 minutes	Internet-connected Samsung TVs

Each method has its strengths. The auto search is best for beginners. Manual entry gives you the most control. Smart Hub pairing is the fastest if your TV supports it.

Quick Tips for Success

Here are some tips that will make the whole process smoother:

• Stay close to the TV: Keep the remote within 6 feet of your TV during programming.
• Remove obstacles: Make sure nothing blocks the signal between the remote and TV.
• Use fresh batteries: Old batteries can weaken the signal and cause failures.
• Be patient with auto search: Let the remote scan fully. Do not press any buttons during the scan.
• Write down your codes: Save your manual codes in a safe place for future reference.
• Test all functions: After programming, test every button including volume, mute, and input.

Common Mistakes to Avoid

Even with a simple process, mistakes can happen. Here are the most common ones:

Skipping the Preparation Step

Many people jump straight into programming without checking their TV model or inserting fresh batteries. This leads to wasted time and frustration. Always prepare first.

Using the Wrong Code

When using manual entry, entering the wrong code is the biggest mistake. If the code does not work, the remote will not respond. Double-check every digit before pressing Setup.

Not Holding the Setup Button Long Enough

The Setup button must be held until the LED turns red. Releasing it too early resets the process. Hold it for at least 3 seconds.

Ignoring the LED Indicator

The LED light on top of the remote tells you what is happening. If you ignore it, you will not know if a step worked or failed. Watch the LED closely throughout the process.

Forgetting to Save the Code

After auto search finds a working code, you must press Setup again to save it. Skipping this step means the remote will not remember the code. Always confirm the save.

Remote Troubleshooting Tips

What if your Samsung BN59-00687A remote still does not work after programming? Do not panic. Here are some simple fixes.

Reset the Remote

Sometimes the remote needs a fresh start. To reset it:

1. Remove the batteries from the remote.
2. Press and hold the Power button for 10 seconds.
3. Wait 30 seconds.
4. Reinsert the batteries.
5. Try programming again.

A reset clears any old codes and gives you a clean slate. This fixes most programming issues.

Check for Interference

Other devices can interfere with the infrared signals from your remote. Keep the remote away from:

• Other remotes
• USB devices
• Wireless routers
• Microwave ovens

Signal interference is a common cause of unresponsive remotes. Moving these devices aside often solves the problem.

Update the Remote Firmware

Samsung releases firmware updates for their remotes. These updates fix bugs and improve compatibility. To update:

1. Go to Settings on your Samsung TV.
2. Select Support.
3. Click on Software Update.
4. Choose Update Now.

Your TV will check for updates and install them. This also updates the connected remote in most cases.

When to Replace the Remote

If none of the above steps work, your remote may be faulty. Try the remote on a different Samsung TV. If it works there, the issue is with your TV, not the remote. If it does not work anywhere, you may need a replacement.

Expert Insights on Remote Programming

HDMI-CEC is a feature that deserves special attention. HDMI-CEC lets your Samsung BN59-00687A remote control devices connected through HDMI. This means one remote can manage your TV, soundbar, and streaming box. To enable HDMI-CEC:

• Go to Settings on your TV.
• Select General.
• Choose External Device Manager.
• Turn on Anynet+ (HDMI-CEC).

Once enabled, your remote will automatically switch inputs and control volume on connected devices. This is a huge time saver.

Voice control is another powerful feature. The Samsung BN59-00687A remote has a built-in microphone. Press the voice button and speak your command. You can search for shows, change channels, and adjust settings without pressing a single button. This feature works best when your TV is connected to the internet.

For those using a universal remote like a One For All model alongside the Samsung remote, you can program the universal remote to work with your Samsung TV too. Just make sure the device compatibility is confirmed before you start. The Samsung BN59-00687A remote pairs seamlessly with most universal remote systems.

Key Takeaways

• Three easy methods exist: You can program a Samsung BN59-00687A remote using auto search, manual code entry, or the Samsung Smart Hub.
• Preparation is key: Check your TV model, insert fresh batteries, and have your codes ready before starting.
• Auto search is the fastest: It scans all codes automatically and finds a match in under three minutes.
• Manual entry gives precision: Use this method when you have a specific code for your TV brand.
• Smart Hub pairing is the easiest: If your TV is internet-connected, this method requires no codes at all.
• Troubleshooting is straightforward: Most issues resolve with a reset, fresh batteries, or a firmware update.
• Test everything after setup: Always verify all buttons and functions work correctly after programming.

Programming your Samsung BN59-00687A remote does not have to be complicated. With the right method and a little patience, you will have it working in minutes. Start with the auto search method if you are new to this. Move to manual entry or Smart Hub pairing if you need more control. The key is to follow each step carefully and not rush the process.

Once your Samsung BN59-00687A remote is programmed, you will enjoy a much better TV experience. One remote to control everything. Voice commands to search instantly. Smart Hub access at the touch of a button. These features make watching TV more enjoyable and convenient.

Take the time to set up your remote properly today. You will thank yourself every time you pick up the remote to watch your favorite show. A well-programmed remote is the small thing that makes a big difference in your daily entertainment routine.

Frequently Asked Questions

How long does it take to program a Samsung BN59-00687A remote?

The auto search method takes about 2-3 minutes. Manual code entry takes 5-10 minutes. Smart Hub pairing is the fastest at 1-2 minutes. The total time depends on which method you choose and how many codes you need to try.

Can I program a Samsung BN59-00687A remote to control a non-Samsung device?

Yes, you can. The Samsung BN59-00687A remote supports universal remote codes for many brands. Use the manual code entry method and look up the code for your specific device brand. This works with TVs, soundbars, and streaming devices from different manufacturers.

Why is my Samsung BN59-00687A remote not working after programming?

This is usually caused by weak batteries, signal interference, or an incorrect code. Try replacing the batteries first. Then check for nearby devices that might cause interference. If the problem persists, reset the remote and try programming again with a different code.

Do I need an internet connection to program a Samsung BN59-00687A remote?

Not for auto search or manual code entry. You only need an internet connection if you are using the Smart Hub pairing method. The Smart Hub method downloads pairing information from Samsung servers. For the other two methods, your TV just needs to be powered on.

Can I program the Samsung BN59-00687A remote for multiple devices?

Yes, you can. The remote supports multi-device programming. Use the manual code entry method to add codes for each device. You can program the remote to control your TV, soundbar, and streaming box all at once. Each device will have its own assigned code.

What should I do if the auto search method does not find a working code?

Try the manual code entry method instead. Look up the specific code for your TV brand on the Samsung website or in the user manual. If neither method works, reset the remote and try again. You can also check for firmware updates on your TV that may add support for your model.

=== CONCLUSION ===

Programming your Samsung BN59-00687A remote is a simple process once you know the right steps. Whether you choose the auto search method, manual code entry, or Smart Hub pairing, each approach gets the job done. The key is to prepare properly, follow each step carefully, and test all functions after setup.

Now that you know how to program a Samsung BN59-00687A remote, you can enjoy the full experience this remote was designed to deliver. Voice control, Smart Hub access, and multi-device support are all at your fingertips. Take a few minutes today to set everything up. You will wonder how you ever watched TV without a fully programmed remote.